Description
The Bitmain APW11 Power Supply (17V-21.6V EMC PSU) is ideal for powering water-cooled Antminer rigs, including the S21 Hydro, S19XP Hydro, S19 Hydro, T19 Hydro, S19 Pro Hydro, and S19 Pro+ Hydro SHA256 models. Ensure compatibility with your miner version by contacting our sales team before purchasing the APW11 PSU.
Note: Please update your ANTMINER with the newest firmware accordingly after replacing the power supply. You can contact us for the firware.
| Product Glance | |
| Out1 | |
| DC Voltage | 17V-21.6V |
| Rated Current(380V input) | 300A |
| Rated Power(380Vinput) | 6500W |
| Ripple & Noise | <1% |
| Line Regulation | <1% |
| Load Regulation | <1% |
| Setup Time | <5S |
| Short Circuit Protection | >10mS |
| Detailed Characteristics | |
| Out2 | |
| DC Voltage | 12.3V |
| Rated Current(220 V input) | 1A |
| Ripple & Noise | <1% |
| Voltage Accuracy | 12.2V—12.4V |
| Line Regulation | <1% |
| Load Regulation | <1% |
| Setup Time | <5S |
| Short Circuit Protection | >10mS |
| Voltage Range | 380 – 415V AC |
| Frequency Range | 50~60 Hz |
| Power Factor | >0.99 (full load) |
| Leakage Current | <1.5mA (380V 50Hz) |
| Low-voltage Input | <304V AC |
| Output Short Circuit | Yes |
| Overheat Protection | Yes |
| Over-current Output | 300A – 350A |
| Operating Temperature | -20 – 45℃ |
| Operating Humidity | 20% – 90%RH (non-condensing) |
| Altitude | <2000m |
| Dimensions | 320mm * 179mm * 63mm |
| Net Weight | 5kg |
| Cooling System | Water cooling |
| Inlet temperature | 20 – 35 ℃ |
| Water flow rate | 8L/min |
| Water pressure | 3 BAR |
While APW11 17V-21.6V EMC (b Version) suit for Antminer S19 Hyd / S19XP Hyd / T19 Hyd / S19 Pro+ Hyd SHA256 Hydro-cooling miner;
APW111721c 17V-21.6V RSPri_V1.25 EMC is suit for Antminer S21 Hyd Hydro-cooling miner.
Bitmain Antminer
IceRiver
Whatsminer
Goldshell
Jasminer
BOMBAX
Canaan Avalon
Elphapex
IPollo
iBelink
Volcminer
Fluminer
Bitdeer
Bitcoin
Kaspa
ETC
ScPrime
ALPH
Litecoin
Dogecoin
Bells
Kadena
Luck miner
Bitaxeminer

Reviews
There are no reviews yet.